Tuesday, December 2, 2014

Buy Redmi Note from Flipkart in Flash Sale for Sure

Wednesday, October 22, 2014

[Latest] Mi Phone Manager : (English) for PC for new Xiaomi Mi 3 Redmi buyers in India and English Supported Countries








Resources to Download :


Click here to download the Setup Files :  http://1drv.ms/1yWPKvq

Steps to install:
  1. Start the setup with ADMINSTRATIVE rights , right click on setup and select /Click "RUN AS ADMINISTRATOR"
  2.  After Mi setup Finishes Kindly Close the Setup
  3.  If still missed closing it , a error will pop up like this , just Close the mi phone manager from System tray , press Retry
  4. Killing process " Mi phone manager.exe and MI phone helper.exe "on TASK MANAGER ( ctrl+shift+Esc) , then press retry.
  5. Only Patch Setup can Work On any Version above V2.0 , just be sure Miphone manager is not running in background

Monday, October 20, 2014

[Solved] Data in my Pen Drive exists but does not show up in My Computer

Hello Friends, Last night i ran in to a Problem where my 32 GB pen drive which was almost full with very important data was not showing up in my computer.
Irony of the situation was it was showing up in my TV. I could play all the videos and Images but when i connect it to my computer it showed nothing.
Was worried as i didn't had backup of it,

After searching a lot on net i found out a command to run which fixed it like a charm.


Steps:

1) Go to RUN
2) Type CMD
3) Enter the following command and press ENTER

attrib -h -r -s /s /d g:\*.*


Where g which is highlighted in Yellow is my drive letter.
Go to my computer and see the drive letter of your pen drive or drive which is not showing up files.


It took 30 seconds and it started showing me all the files and folders.

Hope it helps you and others.
So please keep sharing,


Sunday, August 24, 2014

Mi Phone Manager : (English) for PC for new Mi 3 buyers in India and English Supported Countries

Mi Phone Manager : (English) for PC for new Mi 3 buyers in India and English Supported Countries
Steps to install:

1. Download resorces below

2. Read Eng Trans.txt file
3. follow the steps thats it














Copy and replace these files in C:\Users\{YOUR PC USER NAME}\AppData\Local\MiPhoneManager\main folder.
Note 1: AppData folder is a hidden folder in Windows.
Note 2: If you get a “file in use” error, try terminating all the MiPhoneManager processes on the Task Manager, and do the copy and replace again.
Note 3: I’ve only tested the following path on a Windows 7 and 8.1 computers.
Now, you can launch the MiPhone Manager to confirm it’s in English.


NOTE: PLEASE FOLLOW THIS LINK FOR LATEST VERSION 

http://being-imran.blogspot.in/2014/10/latest-mi-phone-manager-english-for-pc.html#.VEdS2_mUeuI



Monday, June 16, 2014

Ramzan Time Table Mumbai 2014



***This time table is only for Mumbai.


Ramzan
Date
Day
Sehri Time
Iftar Time
1
30-Jun-14
Monday
4:30 AM
7:24 PM
2
1-Jul-14
Tuesday
4:30 AM
7:24 PM
3
2-Jul-14
Wednesday
4:30 AM
7:24 PM
4
3-Jul-14
Thursday
4:31 AM
7:24 PM
5
4-Jul-14
Friday
4:31 AM
7:24 PM
6
5-Jul-14
Saturday
4:32 AM
7:24 PM
7
6-Jul-14
Sunday
4:32 AM
7:24 PM
8
7-Jul-14
Monday
4:33 AM
7:24 PM
9
8-Jul-14
Tuesday
4:33 AM
7:24 PM
10
9-Jul-14
Wednesday
4:34 AM
7:24 PM
11
10-Jul-14
Thursday
4:34 AM
7:24 PM
12
11-Jul-14
Friday
4:35 AM
7:24 PM
13
12-Jul-14
Saturday
4:35 AM
7:24 PM
14
13-Jul-14
Sunday
4:36 AM
7:24 PM
15
14-Jul-14
Monday
4:36 AM
7:24 PM
16
15-Jul-14
Tuesday
4:37 AM
7:23 PM
17
16-Jul-14
Wednesday
4:37 AM
7:23 PM
18
17-Jul-14
Thursday
4:38 AM
7:23 PM
19
18-Jul-14
Friday
4:38 AM
7:23 PM
20
19-Jul-14
Saturday
4:39 AM
7:22 PM
21
20-Jul-14
Sunday
4:39 AM
7:22 PM
22
21-Jul-14
Monday
4:40 AM
7:22 PM
23
22-Jul-14
Tuesday
4:40 AM
7:22 PM
24
23-Jul-14
Wednesday
4:41 AM
7:21 PM
25
24-Jul-14
Thursday
4:41 AM
7:21 PM
26
25-Jul-14
Friday
4:42 AM
7:21 PM
27
26-Jul-14
Saturday
4:42 AM
7:21 PM
28
27-Jul-14
Sunday
4:43 AM
7:20 PM
29
28-Jul-14
Monday
4:43 AM
7:20 PM
30
29-Jul-14
Tuesday
4:44 AM
7:20 PM

Ramzan-Ramadhan-Ramadan 2014 Mumbai-Maharashtra-India Time Table

Monday, February 3, 2014

Warren Buffett’s MONEY SAVING MANTRAS

MONEY SAVING MANTRAS

» Don’t save what is left after spending – Spend what is left after saving – Consider, setting aside money for savings as absolutely mandatory no matter what.
» Develop healthy spending habit – Don’t need to keep up with the Jones – Resist the urge and be frugal.
• Do you have the urge to keep upgrading your mobile phone or car or clothes?
• It is not price inflation that affects people, it is lifestyle inflation that urges people to spend.

» If you buy things you do not need, you will soon be selling things you do need.
• Every penny saved is a penny earned. If you take care of the pennies, the dollars will take care of themselves.
• Include your spouse and the children to contribute to the family’s bottom-line.  For example, your spouse may agree to pack you lunch which would save money from buying lunch outside.  You may take public transport to work twice a week instead of taking your vehicle.  The kids may take the responsibility to turn off lights and fans, and a/c at home or cut down one family dinner out.

» Someone is sitting in under the shade today because someone planted a tree a long time ago.
• Most of the times, our children would enjoy the benefits of our saving just as we are enjoying the investments that our parents made for us.

» Knowing when to get out of a bad investment is as important as knowing when get into a good investment.
• Don’t throw the good money after the bad.
• Believe that you cannot make money on every investment.  That is the way it is.

» Investment is a marathon – It takes long years of disciplined investments to see sizable results.

» Keep reading on various money related articles – When you get sick, you ask the doctor a lot of questions. Similarly, you need to ask a lot of questions and for that, you need to read a lot. Don’t leave the investment responsibility to your agent or broker.

» Protect against catastrophes that can wipe out your savings. For example, make sure your home, and belongings are protected with proper insurance. Make sure you have ample health insurance for yourself and for all the family members that you are responsible for. Make sure the earning members of the family have term life insurance and disability insurance.

» Why pay taxes if you can legally put money into tax saving investments? Tax planning is a very important port of savings.

Friday, January 24, 2014

Pre-2005 currency notes called back by RBI

The Reserve Bank of India (RBI) has announced its plans to withdraw all currency noted issued before 2005. 


 Valid:
 Valid: 


Not Valid 

Identifying Pre 2005 Currency Notes: Currently the Reserve Bank of India prints currency notes in the denomination of Rs. 5, Rs. 10, Rs. 20, Rs. 50, Rs. 100, Rs. 500 and Rs. 1,000. All the notes printed before the year 2005 do not have the year of printing marked on it. All currency notes printed post 2005 have is year of printing clearly printed in the middle of the bottom row on the backside of the note. If your bank note has no year of printing on the back, it means the note is printed before 2005 and needs to be exchanged with the bank as per the RBI deadline. All notes with the year of printing indicated on the currency note would stay in operation as all of them are posted after 2005.


Exchange process starts from 1st April 2014  and Ends on 30th June 2014.

All public sector as well as private banks have been asked to create a dedicated exchange counter where both account owners as well as non account owners of that bank or branch can exchange their old currency notes for new ones. These exchange counters will become operation from 1st April 2014.If you have a large amount of old currency notes with you, you may want to exchange them, before 30th June 2014. So why is this date important? All exchanges done before 30th June would be unconditional. For any exchange of more than ten pieces of old Rs 500 or Rs 1000 notes after that date would require identity proof and address to be shared with the bank if you are a non customer of that bank.

Friday, January 17, 2014

Installing LightJB 4.1.2 the most stable jelly bean for Samsung Galaxy S Advance GT I9070

STOCK GB ALL THE WAY TO JB CUSTOM ROM

If you run Gingerbread, start from A directly
If you run un-rooted Jellybean, start from B
If you run rooted Jellybean with a custom kernel, start from C.
If you run rooted Jelly Bean without a custom kernel, start from B, but skip number 1 and 6.




You might want to read this before starting, it is optional though, but will give you a better idea of what you're doing.


GUIDE
This guide shall guide you through turning your suckish GB i9070 (not i9070p) to Custom ROM JB Awesomeness.

Unless your phone shipped from Russia, it probably has Gingerbread preinstalled... so, let's first Jellybeanize it.

A) JELLYBEANIZATION:
Download Odin3 from here. http://adf.ly/NDChW. Extract it into a folder.

Download Stock JB firmware from here.
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip.

Extract it into a separate folder, you will get a .tar.md5 file.
Make sure you have Kies installed, but not running.
Turn your phone off, and boot into Download mode, this can be done by holding the Vol.Down+Home+Power buttons together at the same time, till it boots.
Press Volume up to continue. Plug in your phone (make sure it's at least 60% charged) .
Wait till Odin recognizes (It should say something like COM:PORT... to the left).
Click on PDA and choose the firmware (.tar.md5) that you extracted in step 2.
Click start. Right now, a virus which will fry your phone's internals is being installed... Calm down, joke.
When your phone boots into JB, and Odin says "PASS". Unplug.

NOTE: There is a chance that you will get a bootloop ( i.e. Android won't boot ). No, no, no... your phone isn't broken! Simply reboot to stock recovery by powering off, then pressing Vol.Up+Home+Power buttons together and wipe data/factory reset. It'll boot nicely

Now, you are currently on a stock Samsung Jellybean firmware, which is not rooted. This basically means that you do not have access to modifying the system files in your ROM, which means that you cannot install any custom kernel, custom recovery or a custom ROM... In section B, you will learn how to gain root access, install a custom kernel with a custom recovery.

B) ROOTING, KERNEL & TWRP/CWM:

Download Shaan's root (root.zip)  from here http://d-h.st/ook
Download Temporary (Update.zip) cwm from here  http://d-h.st/oZD

Download (CoCore-E-5.0-TWRP.zip) CoCore + TWRP (TWRP is one of the two recoveries available, we will use it in this guide because it looks less intimidating, and it's touch-enabled ) from here https://r7android.googlecode.com/files/CoCore-E-6.8-TWRP.zip

Sometimes after temp cwm you are nt able to access the Mem card which leaves you with 2 options.
1)Factory reset by going back on main screen of cwm and then look for sd card again
2)Choose it from Internal Memory.

Place all 3(or 2 if you're rooted) zip files in your external SD card
Power off. Boot into recovery by holding Vol.Up+Home+Power.
By navigating via volume buttons, choose install zip from external sd card, and install root.zip... shouldn't take long.
In the same way install update.zip. Now in a few seconds, you will get a different screen, this is Clockworkmod recovery, albeit a temporary one..
In this recovery, go to install zip, then install zip from external sd, and choose CoCore+TWRP. After installation, keep going back until the main cwm screen, and hit reboot.

NOW, Everytime you boot into recovery (which is the way to backing up and installing custom ROMs) you will get TWRP.

Now, you are rooted, with a custom kernel, and TWRP ( a custom recovery). You can either stay on stock Samsung firmware, or continue through section C, and get yourself a custom ROM.

C) INSTALLING A CUSTOM ROM:

Download LightJB 4.12. from http://d-h.st/vge 

Download any custom ROM (Recommendations at the end of the thread) zip and place it in the root of your external (or internal, but i prefer ext.) sd.
Boot into recovery.
Navigate by touch, press backup, and slide as instructed to make a backup.
Go back to the main screen and choose install. If the zip has been placed in ext. sd. then press on external sd and choose the appropriate zip and slide to install. If placed in internal sd, then choose internal sd from the top and go to /emmc folder, and choose zip and install.
When finished, navigate to the recovery home, and press reboot sytem.

Frequently Asked Questions

Q- Which of the above will increase my binary counter?
A- None! Let me clarify how the binary counter is tipped. The only way the binary counter can be increased is if you flash anything that is non-official Samsung signed, via Odin.

Q- How do I unroot?
A- You can unroot simply by following the steps in section A and not continuing with the rest of the guide.

Optional : To Increase Battery Life Watch the Following Video :



[How to Install] Update Galaxy S Advance I9070 to Android 4.4.2 KitKat

Galaxy S Advance I9070 users can now enjoy the latest Android 4.4.2 KitKat features in a stable build, thanks to Mcclaw's release of CyanogenMod 11 (CM11) ROM Build 4 at Mcclaw Studio. The ROM is the result of a successful CM11 port from Galaxy Ace 2 to the older S Advance I9070.


Android 4.4.2 CyanogenMod 11 Build 4 Features

Here is the complete list of features ported into this ROM:

2D/3D HW Acceleration
audio (both speakers/headphones/microphone)
GPS and A-GPS – fast fix getting
Glonass navigation
compass
sensors
Wi-fi
Bluetooth 4.0 with LE support A2DP
all native tethers (Wifi/BT/USB)
Google Play
CM11 functionallity
CPU sleep mode
MTP
ADB
no tearing
tripple buffering
YouTube HQ
Wifi direct
external storage
camera
video playing
SELinux (temporary disabled)
BLN (backlight notifications) support
offline charging
auto EFS backup
New BT/GPS/offline charging/sensors drivers – no longer buggy Samsung's ones!
built using Linaro toolchain
also flashable via Odin
Some key bug fixes and improvements ported into this ROM are as follows:

All video players, including Twitch are working correctly
Phone (Dialer app) works very fast with this build
More changes expected from latest S3 Mini releases
Interested users can go ahead and install Android 4.4.2 KitKat update on their Galaxy S Advance using our step-by-step guide given below. IBTimes UKwill not be held liable for any device damage during or after the firmware installation. Users are advised to proceed at their own risk.

Pre-requisites

The Android 4.4.2 official AOKP ROM and the instructions given in this guide are meant for the Galaxy S Advance GT-I9070 model only. Verify device model number by navigating to Settings > About Tablet.
Verify that your phone has access to the latest custom recovery tools such as TWRP v2.6.3.0 and higher or CWM v6.0.4.5 and above.
Back up data and settings using a recommended custom recovery tool, like ClockworkMod (CWM) or TWRP, as it creates a complete image of the existing tablet setup. In Recovery, choose Backup and Restore and tap Backup.
Verify correct USB drivers for the phone are installed on the computer (download Galaxy S Advance I9070 USB drivers) from https://rapidshare.com/files/416304166/SAMSUNG_USB_Driver_for_Mobile_Phones.exe

Ensure USB debugging mode is enabled on the phone, by navigating to Settings > Developer Options (NOTE: Tap the device's Build Number seven times to unlock or reveal the hidden Developer Options under Settings.) Then select the checkbox to enable USB debugging mode under Settings > Developer Options.
Make sure the device has at least 80% battery charge to prevent unexpected device shutdown (due to battery drain) while installing the ROM.

We are not responsible for any damage to your phone or data. Please take backup of your device prior to this update.

Ensure the phone is unlocked (not locked to a specific carrier) and rooted with the latest ClockworkMod (CWM) Recovery (v6.0.4.5) installed.

If not installed please follow these steps to install custom recovery mode (CWM or TWRP)


*** Sometimes after temp cwm you are nt able to access the Mem card which leaves you with 2  options.

1)Factory reset by going back on main screen of cwm and then look for sd card again 

2)Choose it from Internal Memory.
  • Place all 3(or 2 if you're rooted) zip files in your external SD card
  • Power off. Boot into recovery by holding Vol.Up+Home+Power.
  • By navigating via volume buttons, choose install zip from external sd card, and install root.zip... shouldn't take long.
  • In the same way install update.zip. Now in a few seconds, you will get a different screen, this is Clockworkmod recovery, albeit a temporary one..
  • In this recovery, go to install zip, then install zip from external sd, and choose CoCore+TWRP. After installation, keep going back until the main cwm screen, and hit reboot.
  • NOW, Everytime you boot into recovery (which is the way to backing up and installing custom ROMs) you will get TWRP.

Now, you are rooted, with a custom kernel, and TWRP ( a custom recovery). You can either stay on stock Samsung firmware, or continue through section C, and get yourself a custom ROM.


Downloads Required
Update 3: Download Latest Android 4.4.2 KitKat CyanogenMod 11 ROM 
http://get.novafusion.pl/?id=833

Android 4.4.2 KitKat CyanogenMod 11 ROM Build 4 (dated 2014-01-12)
https://mega.co.nz/#!Fh0yAbAZ!fDQR8EkErxMmLj8F7b2eJXgOkrxuwRA0ZHolhoB3t9I

Use this Rather than above for Wifi Fix
Updated KitKat 4.4.2 (CyanogenMod 11.0) 20140211 -  http://get.maclaw.pl/?id=656


Google Apps for Android 4.4.2 (dated 26-11-2013)
http://get.maclaw.pl/?id=164

OR

Update 3:  Latest Google Appsfile  : http://get.novafusion.pl/?id=581



Please Watch the Video in order to follow step by step process:



Steps to Install Android 4.4.2 KitKat Update on Galaxy S Advance I9070 with CyanogenMod 11 ROM

Step-1: Download Android 4.4.2 CyanogenMod 11 Build 4 for Galaxy S Advance to computer

Step-2: Download Google Apps package

Step-3: Connect the Galaxy S Advance to computer via USB cable. Without extracting, copy the downloaded firmware zip and Google Apps zip files to the root folder of phone.

The Android 4.4.2 CM11 ROM can be installed on the Galaxy S Advance I9070 using either CWM or TWRP recovery. Follow any method based on the recovery mode installed on your device.

How to Install Android 4.4.2 CyanogenMod 11 ROM via ClockworkMod (CWM) Recovery

Power off the phone and wait for 6 to 7 seconds until the device shuts down completely.
Now press and hold Volume Up, Home and Power buttons together until the Galaxy S Advance logo appears on screen and the device boots into recovery mode. NOTE: In recovery mode, use Volume keys to navigate between options and Power key to select the desired option.
Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress) and choose Yes on next screen to confirm the action. Then perform Wipe Cache Partition and once again hit Yes to confirm.
From the main menu of CWM recovery, go to Advanced and choose Wipe Dalvik Cache. Then hit Yes on next screen to confirm.
Select Install Zip from sdcard and then click Choose zip from sdcard. Browse to the location of the AOKP ROM firmware file which you copied earlier to your phone. Choose Yes on next screen to confirm the ROM installation.
Repeat the previous step to install Google Apps as well.
Once Google Apps is also installed, select "+++++Go Back+++++"and reboot the device by tapping reboot system now from the recovery menu. Your Galaxy S Advance will restart and it may take about 5 minutes for first boot. So, do not interrupt the process.
Your Galaxy S Advance I9070 is now running on Android 4.4.2 KitKat via CyanogenMod 11 Build 4. Go to Settings > About Phone to verify the firmware installed.

NOTE: If the device gets stuck at boot loop (while rebooting), then just do a factory reset from recovery mode to fix the issue.

How to Install Android 4.4.2 CyanogenMod 11 ROM via TWRP Recovery

Power off the phone and wait for 6 to 7 seconds until the device shuts down completely.
Now press and hold Volume Up, Home and Power buttons together, until the Galaxy S Advance logo appears on screen and the device boots into recovery mode. NOTE: In recovery mode, use Volume keys to navigate between options and Power key to select the desired option.
Perform Wipe data/Factory reset (this will delete all apps and their settings and game progress). To do so, tap on Wipe and scroll down to the bottom of the screen and do a Swipe on "Swipe to factory reset" option.
Now perform a System format by selecting Wipe > Advanced Wipe and then tap on System option. Scroll to the bottom of screen and do a swipe on "Swipe to Wipe" option.
Tap on install and navigate to the CM11 ROM zip file you copied earlier to your phone. Scroll to the bottom of screen and do a swipe on Swipe to confirm flash option to begin installing the firmware.
Repeat the previous step to flash Google apps as well.
Once Google Apps is also installed, select reboot and then tap on System to reboot your device. Your Galaxy S Advance will restart and it may take about 5 minutes for first boot to complete. So, do not interrupt the process.

Your Galaxy S Advance GT-I9070 is now running on Android 4.4.2 KitKat via CyanogenMod 11 ROM. Go to Settings > About Phone to verify the firmware installed.

NOTE: If the device gets stuck at boot loop (while rebooting), then just do a factory reset from recovery mode to fix the issue.

Tuesday, January 14, 2014

How to apply for learning licence online in Andheri RTO Mumbai Maharashtra

Hello Friends,

There is a change in the process of applying for learning licence in Andheri RTO Mumbai from 30th Dec 2013.

So starting 2014 all new learning licence process in Andheri RTO goes online.

A candidate has to take appointment online and have to go to RTO at prescribed time with set of documents required.

Lets have a look at how this process works.

Only up to 350 appointments are allotted each working day, for the various time slots between 9.30 a.m. to 3.30 p.m. The applicant can choose date & time as per their convenience by submitting the filled in e-form provided. On successful submission of e-form, the applicant will get an acknowledgment on his email id.

How to download Learning Licence Forms and appointment receipt ?
On receiving the confirmation email from Regional Transport Office, Andheri (West Zone), the applicant should download the following:

• Appointment Receipt
• Form No. 2
• Form 1 (Physical fitness declaration)
• Form 1-A (Medical certificate to be certified by a medical practitioner
   having educational qualification not below M.B.B.S., only in case of application for Transport Licence &  for the transport having age above 50 years).

After downloading the above documents, applicant should fill up the relevant information and affix relevant signatures at the places mentioned on these forms.

The applicant should remain present at the Regional Transport Office on the date and half an hour prior to the allotted time slot.

Applicant should carry the mentioned forms in original along with copy of the following:

• Appointment (Token number) receipt.
• Proof of address, age, nationality documents.
• Two passport size photographs.

How to cancel the appointment ? 
If an applicant wants to cancel their appointment, they could cancel the same 48 hours prior to their allotted appointment; they can choose the “cancel appointment” and proceed. If the applicant wishes to postpone their appointment, they need to first cancel the earlier appointment and then choose a new date.

How to go through Learners Licence procedure ?
On getting confirmed online appointment for Learners Licence, applicant will have to remain present at the Learner Licence section, Ground Floor of the new building, half an hour prior to the allotted time. Applicant will then have to go through the following steps:
(A) Verification of documents and physical fitness declaration i.e. eye vision, color blindness etc.
(B) Payment of fees
(C) Data entry
(D) Biometrics (Digital photographs, signature, thumb impression capturing)
(E) Road safety education and test preparation
(F) Online computer test of preliminary knowledge of Traffic signs etc. (20 questions - objective test on screen)

Rejection or issuance of licence is done on spot, based on your test results.

Issuance of Learning Licence 
Once the test results are declared, only those who have scored 12 or more points are declared passed, those who have failed may reappear for the test, after 7 days from the date of the test.

Successful candidates will receive their Learner Licence within 10 minutes and on the spot. The learner licence holder should appear for the test of competence for obtaining the permanent licence after 30 days and within 6 months from issue of Learner Licence. LL is valid for 6 months and cannot be renewed. On expiry of the Learner Licence, the holder will have to re-apply for new learners licence.

All applicants having jurisdiction under the Regional Transport Office, Andheri (West Zone) are hereby requested to make best use of the newly implemented appointment system and assist this office in creating a transparent and efficient licence system based on eligibility.

Practice for test 
Test practice facility is available on our official website. Applicants can click on learner licence test and take a practice the test, prior to appearing for the actual test.

Click here to take an Appointment.

 or visit 

http://www.mahatranscom.in/AMS_Registration2013.aspx

Watch the Video in order to understand how to fill the form.
Please Share this to help others !


Video in English:

Video in Hindi:



Thursday, January 9, 2014

23-amusing-characters-in-every-indian-it-company



1. Freshers – fresh out of college, lost, scared, asks for access cards, directions

2. The 2yr experience guy – bored with IT, wants to startup but won’t, only bakchodi

3. Excel guy – Team Lead kinda guy, no coding skills, good at assigning tasks




4. Maska marne wala (Boss’s pet)

5. The rolling-eyes – stares at everyone, specially at the other sex




6. The Invisible man – unnoticeable, gets the least number of tasks




7. The phone guy/gal – always on the phone (probably talking to the “louve” of their lives) :P



8. The Credit Thief – steals appreciation, shows-off at conference calls



9. Onsite bugger – boring & bechara (listens to client’s gaalis) & angry

10. The Slog – work is worship, works on weekends, gets hospitalized due to work

11. Gossip Raja/Rani – the watercooler guy/girl, first one to know and spread office gossip

12. The Foodie – food is fuel, munches every 5 minutes

13. The Piggyback – can’t survive work-stress on own, piggybacks on someone else’s shoulders

14. Smarty Pants – blows their own trumpet the loudest, works the least

15. The geek – knows everything, can do everything, everyone wonders why he still hasn’t switched to a better job

16. The Pushover – gets cajoled into doing other’s work, emotional, nods to everything

17. The Higher Studies folks – preparing for CAT, GRE, dreams of better bucks

18. Honeymoon Period guy – has resigned, serving notice period, won’t work, laughs at others\

19. Chai-Sutta guy – the loudest, takes everyone to the chai-tapdi



20. The 6'o clock work-life balancers – leaves office at 6, no questions asked (or answered)

21. Enthusiasts – the bloggers, players, artists, trekkers, CSR guys etc.

22. The Cheapster – hesitates to pay for chai, sutta, breakfast, lunch when in a group


23. Senior Managers – the freshers atleast know a few things, but senior management is completely lost

Watch the Video 




Tuesday, January 7, 2014

New Honda City launched 2014, priced from Rs. 7.4 lakh

The much anticipated new Honda City has hit the Indian markets. Honda Cars India on Tuesday launched the fourth generation of its City model, which will also have a diesel variant for the first time in the sedan's history.

The price of petrol variant of new Honda City starts from Rs. 7.42 lakh (ex-showroom Delhi) and diesel from Rs. 8.62 lakh.

The diesel model is powered by an i-DTEC diesel engine, which, according to the company, offers a mileage of 26 kmpl. The new City comes in six colours.

The diesel versions would be available for immediate delivery while the petrol models would be available from mid-February. The bookings for the new Honda City have already commenced. Honda said that it has received over 9000 bookings for the new City.

The all-new Honda City was unveiled in November in New Delhi when the company chose India for the first time to debut a brand new car. Since the first generation of City was launched in 1998, Honda has sold 4.3 lakh units of this model in the country.

The length (4440 mm) and width (1695 mm) of the new City is unchanged from the previous version. But the wheelbase of the new City has increased by 50 mm (at 2600 mm) and the height is up 10 mm (to 1495 mm), helping to offer new enhanced cabin space.

Boosted by the success of its Amaze model, Honda Cars had crossed the 1 lakh sales mark for the first time in a year, with total sales volume of 107,661 units in the calendar year 2013. The new City is expected to further give a fillip to its sales in India.